Cart 0

Cleaning Two-Layer Acrylic Parts

Posted by Laser Tech on

What is Engraving Dust?dusty laser cut acrylic

Laser cutting creates a layer of dust which is not cleaned on the cutting floor.

cleaning dust from two layer acrylic

First gently wipe the individual parts with a clean cloth dipped in some alcohol. This will remove the excess dust created during engraving. Two layer is the only acrylic that completely withstands the alcohol test. **No cracking, fracturing or splitting occurs when you clean two-layer acrylic with alcohol.** 

waxing two layer acrylic
Wax gives two layer acrylic a higher contrast and shines up the bottom layer. It will never be glossy like regular acrylic, but it will have a soft sheen. We recommend a finishing wood wax like Howard Feed -N- Wax. 

Share this post

← Previous Post Next Post →